1.Installation
After the particles shows up at the plant, the granulator is utilized as the primary motor, as per the quantity of units, and is coordinated with the innovative cycle. Find the height level, and the establishment of the edge has a foot opening, which can be introduced on the solid.
2.Debugging
The machine has been repaired before establishment, and it should be fixed after establishment.
(1) Adjustment of roller leeway
Underway, it is here and there important to build the yield or increment the chomp point. As of now, the separation between the two rollers can be changed, and the separation between the dynamic roll and the uninvolved roll can be changed. The particular advances are as per the following: after the closure, the weight cap at the two finishes of the uninvolved pivot is taken out and the whimsical sleeves inside the two finishes are turned a similar way. One position, the two rolls can not impact one another, and ought to be kept between the 0.3~1mm.
(2) Adjustment of the partner of the ball attachment
The ball attachment is shaped by a couple of dimples on the outside of the two rollers, so there is an issue of hub arrangement and circumferential contradiction.
A: The hub arrangement have been changed at the hour of establishment. On the off chance that change is required, fix or slacken the organ on the two sides of the inactive bearing seat, in this way pushing the dislodging of the erratic sleeve to compare to the dynamic roller.
B: I machine initially empties the uninvolved stuff and the change sleeve six associating screws, so the change circle and the latent stuff is somewhat off, the stuff is outfitted with changing fasteners, regardless of how much the separation can be changed, after change, lock all screw retrial machine.
Type II machine will be changed with eight electrical discharges coupling, and all jolts retry should be bolted after change.
Information from: https://fertilizerplantequiment.com/
Commentaires